Performance of the maintenance

Performance of the maintenance method of the correct key is saved on the shoes, but the appearance and maintenance is mainly reflected in the scientific cleaning the shoes.

First, performance maintenance (mbt chapa shoes):

As mbt shoes cheap produced more types of raw materials, including leather, cloth, nylon, non-dragon, no trace of  Ring Watches rubber, etc., (11), and manufacturing processes more complicated, where glue stick together more, it is these guarantees with a pair of shoes performance. So the correct way to write the preservation of the following points should be noted.

First, the mbt shoes should be placed in a relatively dry and ventilated place, avoid direct sunlight, because the humid environment may cause corruption body shoes, sun exposure will make the shoes part of the material deterioration color. But the place has not put shoes too dry, because the result in cracking of leather. Because the humid environment may cause corruption body shoes, sun exposure will make the shoes part of the material deterioration color.

Second, save the shoes when the shoes should be stuffed in a soft ball of paper, do so primarily to ball of paper can absorb water shoes to keep the internal residual dry inside, but also conducive to maintaining a fixed shape of shoes, not As for the after use of the “Beat.”

Third, the particular need to be raised is the type of preservation for the collection of the best buy shrink film,Fashion Watches like the shoe store as a pair of shoes which completely surround, in order to achieve the limits of shoes with large air separation, to prevent a longer period of time constant air oxidation of the shoes.

Second, appearance of the maintenance (cheap mbt shoes)

Exterior maintenance primarily in the cleaning area. For different materials, there should be a different approach.

First: the side of the shoe outsole and non-material part of the dragon, you can spray a little collar and the net, after over ten seconds to take the soft bristle toothbrush gently scrub, but scrub the time not too long after brushing should be a timely warm water or cold water to bubble away, to minimize the erosion of chemicals on the shoes of the time. They should be immediately cleaned with a dry cloth to wipe clean residual water, if clean air cushion shoe is visible test, then the above process has finished first clean the air cushion of water around, so as not to make some contact with water, a long time on the decomposition of the glue chemical changes leading to open plastic.Electronic Watches If possible, use a toothpick to tread groove in the course of the jam in the gravel walk out for as long grip the foreign body will tread groove deformation, to a certain extent, affect the braking performance shoes.